Most solid wastes from Southern Company are byproducts of electricity generation.
After combustion of coal and other fuels, some solid byproducts remain. In coal-fueled plants, for example, up to 10 percent of the coal volume remains as ash after combustion.
Although some metals which occur naturally in the coal in trace amounts remain in the ash, they can be safely managed using proper procedures. Some of the ash is stored and managed in facilities on-site at power plants, and some is recycled for concrete, road building and other beneficial uses.
Another type of coal combustion byproduct is gypsum, which comes from an emission control technology called a scrubber. Because gypsum is not produced directly from coal, it is different than ash. Gypsum also has a number of beneficial uses, such as in wallboard, cement and agriculture.
On average, about 30 percent of Southern Company coal combustion byproducts are sold for reuse.
Nuclear power plants produce two levels of radioactive waste. Nearly all high-level waste is used fuel. Low-level waste includes such things as protective clothing, tools and equipment that may contain small amounts of radioactive material. Low-level waste can be shipped to a licensed disposal facility or stored at the plant.
Used fuel is handled by remote control and safely stored inside the most highly secured area of the plant in steel-lined, concrete pools filled with water or on the plant property in steel-lined, concrete containers. Used fuel accumulates at a much lower volume than many people imagine. A thimble-sized nuclear fuel pellet produces the equivalent energy of one ton of coal. An average nuclear plant unit retires about 20 tons of fuel each year that, in volume, could fit in a small room.
Alabama Power and Georgia Power have contracts with the Department of Energy for the permanent disposal of used fuel. The Department of Energy failed to begin disposing of used fuel in 1998 as required by the contracts. Until the contract is fulfilled, used fuel continues to be stored safely on-site, as prescribed in operating licenses.
Southern Company operates three nuclear power plants, Vogtle, Farley, and Hatch. Sufficient pool storage capacity for used fuel is available at Plant Vogtle into 2014, with an on-site dry storage facility to be completed in time to maintain normal fueling operations. At plants Hatch and Farley, on-site dry storage facilities are being used to house spent fuel once it reaches a lower level of radioactivity and can be expanded to accommodate used fuel through the life of each plant. The casks are constructed of steel-reinforced concrete, proven to safely protect the fuel under extreme conditions such as earthquakes, tornados, hurricanes, floods, and explosions.
Byproducts of industrial processes and discarded commercial products, like cleaning fluids or pesticides, make up most hazardous waste. Southern Company has reduced hazardous waste generation in routine electric utility work by employing simple measures like replacing hazardous materials with safer options such as non-chlorinated cleaners and water-based paints.
Exceptional projects, especially those involving new construction, can add to hazardous waste generation. In 2008, hazardous waste increased as we built scrubbers at several plants. Total hazardous waste amounts will decrease when scrubber construction is completed.
Substations and other facilities have electrical equipment that contains oil for its insulation properties. These facilities have procedures in place to prevent oil spills. Spill prevention, control and countermeasures are built into new substations and are being retrofitted on existing facilities. After evaluating almost 2,800 substations, Southern Company identified more than 1,200 requiring Spill Prevention Control & Countermeasures (SPCC) plans. More than 850 retrofits are complete; of the remaining locations, approximately 320 are low-priority sites that only require minor modifications to mitigate.
Southern Company recycles office materials—including paper, cardboard, plastic, aluminum cans, and batteries—plus wood, scrap metal, and other industrial materials. Programs within the company also promote two-sided copying, data center power reduction, and transmission scrap recycling.
Recycling Performance »